Clear Oils And Waxes

We appreciate that people have a look in mind for their home when purchasing doors but a lot of people also overlook the importance of choosing the correct treatment to achieve their desired interior appearance.

Treating your doors will significantly change their overall look so its vitally important that you perform a test to make sure you are using the correct shade before moving on to treat the whole door. Our Treatex oil sample in light oak gives you the chance to see whether you are happy with the appearance before purchasing a full tin.

After a significant amount of time testing different Oils, waxes and Hardwax oils we are pleased to recommend Treatex Hardwax Oil as our preferred method of finishing for our INTERNAL Oak Doors, the reason for this is simple, the finish is the best by far. As the Treatex range has a higher wax content than most on the market the wax will fill up the grain on the door providing a very smooth finish and at the same time helping to slow moisture transfer between wood and the atmosphere.

Treatex Hardwax Oil preserved and enhances the appearance of all types of internal joinery, manufactured on a base of natural and sustainable raw materials including: linseed oil, sunflower oil, beeswax, carnauba wax and candelilla wax.

Being a mix of Oil and Wax, the oil will soak into the wood enhancing the grain, the wax will sit on the surface and fill the grain, ensuring a smooth finish.

Meets with 2010 VOC emissions limits\ Contains no pollutants and very few solvents\ Virtually Odourless\ Very Durable\ Quick drying. Two coats in just 3-6 Hours\ Recommended for those with dust allergies; dirt and dust easily removed\ Resistance to substances such as wine, beer, coffee, tea, fizzy drinks etc\ Slip resistance certified for commercial use: DIN-511, EN-13893

Suitable for all types of internal joinery such as flooring, worktops, stairs, doors and furniture (We have this on our own worktops and floors and cannot recommend it enough)

TREATEX IS NOT SUITABLE FOR EXTERNAL DOORS AND WOODWORK

It's extremely important that timber products are protected from all weather conditions both wet and dry. This Osmo UV protection oil will protect specific external solid oak doors from moisture absorption but also stop them from fading when exposed to the sun for prolonged periods of time. What's more, Osmo products will also enhance the look of your timber products and highlight their natural wood grain surface finish.

Please check your external door manufacturer's guide for their recommended products. This product is not suitable for external veneer doors.

This Osmo Wood Wax Finish in clear is the ultimate choice for finishing all types of wooden internal doors. This clear wood wax is a transparent oil. Allowing the natural grain of the wood to remain visible, this Osmo oil is made to protect any internal timber products.

Ensure your wooden surface is clean, dry and free from frost. There is no need to thin this product, it is ready to use. Simple stir well before use. You can thinly apply this oil with a brush, a roller or a lint free rag. Remember to test a corner of the surface before applying the oil all over. Apply 1 - 2 coats of oil. Approx. coverage: 24m²/L with one coat. Drying time: 24hrs.

This fantastic clear semi-matt Osmo Polyx Oil is incredibly easy to apply and hard wearing, meaning that you can apply this oil quickly, to achieve protection against everyday household spills. The oil is resistant to most liquids such as beer, tea, coffee, juice and even saliva! The oil is micro-porous and will absorb into all the tiny cracks in the wood and will even enhance the grain. If you prefer a matt finish but don't want to dull the finish of your internal solid oak doors, this semi-matt oil is the product for you!

We recommend this oil to our customers as one of the best treatment for their internal solid oak doors, but it is also a great choice for many other timber items such as wooden flooring and furniture!

Each litre tin will cover approx. 8 square metres with two coats and depending on useage will look great for several years, after which it can simply be re-applied. All the ingredients are European Pharmascopoeia compliant, ensuring that they are benzene free and contain only de-aromatised white spirit. this means the product is safe and suitable for use on children's toys, so you don't need to worry about germs!

Application

Oswax is ready to use - you don't need to thin it, simply stir it well.

Apply the 1st coat thinly, thoroughly and evenly along the wood grain, removing any surplus immediately. Allow this coat to dry for at least 8-10 hours ensuring good ventilation.

Apply the 2nd coat as you did the first - this coat will flow much easier than the first. Again allow 8-10 hours for drying and ventilate well.

When the door is thoroughly dry, you may buff or polish by hand or with a machine.

Clean your brushes or rollers using white spirit or benzene-free brush cleaner.

The original Osmo Polyx Oil is probably one of the best products on the market to treat your solid oak internal doors with, this product range is one of our preferred solution for finishing Internal Solid Oak Doors, however. It is a mix of oil and wax, meaning that it will soak into the wood surface (as an oil) but harder and provide a hard wearing wax layer.

It is incredibly easy to apply, just simply brush or spray into the solid oak internal doors, leave for an hour or 2 to dry out and then hang the door. It provides incredibly hard-wearing, micro-porous (breathable) and water repellent surface treatment. Each litre tin will cover approx. 8 square metres with two coats and depending on useage will look great for several years after which it can simply be re applied.

Resistant against wine, beer, cola, coffee, tea, fruit juices, milk and water according to DIN 68861-1C (German Industrial Norm). Ingredients include solvents (de-aromatised white spirit, benzene free and complying with the purity demands of the European Pharmacopoeia). Safe for children's toys and fast to saliva and perspiration according to European Norm EN71 and DIN 53 160.

Application Apply with a brush or roller

Oswax is ready to use - you don't need to thin it, simply stir it well.

Apply the 1st coat thinly, thoroughly and evenly along the wood grain, removing any surplus immediately. Allow this coat to dry for at least 8-10 hours ensuring good ventilation.

Apply the 2nd coat as you did the first - this coat will flow much easier than the first. Again allow 8-10 hours for drying and ventilate well.

When the door is thoroughly dry, you may buff or polish by hand or with a machine.

Clean your brushes or rollers using white spirit or benzene-free brush cleaner.

This Osmo Polyx Oil Effect Raw is a fantastic way to treat your solid oak internal doors, without altering the colour of the timber much at all. Polyx oil is extremely hardwearing and durable, enhancing the protection of your doors and furniture from marks and scratches.

Dry time: 24 hrs, remove white pigments from surface before leaving to dry

Coverage: 30m²/L with one coat

Recommended amount of coats: 2 coats (or 1, plus top coat of Polyx®-Oil Original)

Application

Apply with a brush or roller

Oswax is ready to use - you don't need to thin it, simply stir it well.

Apply the 1st coat thinly, thoroughly and evenly along the wood grain, removing any surplus immediately. Allow this coat to dry for at least 24 hours ensuring good ventilation.

Apply the 2nd coat as you did the first - this coat will flow much easier than the first. Again allow 24 hours for drying and ventilate well.

When the door is thoroughly dry, you may buff or polish by hand or with a machine.

Clean your brushes or rollers using white spirit or benzene-free brush cleaner.

In a busy home environment it's important to make sure that your veneered doors are protected and won't be stained by drinks spillages or mucky hands. Osmo door oil is an oil based product which means liquids will not penetrate the wood causing lasting damage.

This Osmo Door Oil in Raw Matt is specifically formulated for veneered internal doors, frames and other veneer timber accessories. NOT suitable for solid oak doors. The raw matt finish will protect your doors for years to come, leaving the natural light colour to your wood. Please allow 24hrs dry time. Coverage: 24m²/L with one coat.

Osmo Polyx Oil is incredibly easy to apply and hard wearing, meaning that you can apply this oil quickly, to achieve protection against everyday household spills. The oil is resistant to most liquids such as beer, tea, coffee, juice and even saliva! The oil is micro-porous and will absorb into all the tiny cracks in the wood and will even enhance the grain.

We recommend this oil to our customers as one of the best treatment for their internal solid oak doors, but it is also a great choice for many other timber items such as wooden flooring and furniture!

Each litre tin will cover approx. 8 square metres with two coats and depending on useage will look great for several years, after which it can simply be re-applied. All the ingredients are European Pharmascopoeia compliant, ensuring that they are benzene free and contain only de-aromatised white spirit. this means the product is safe and suitable for use on children's toys, so you don't need to worry about germs!

Application Oswax is ready to use - you don't need to thin it, simply stir it well.

Apply the 1st coat thinly, thoroughly and evenly along the wood grain, removing any surplus immediately. Allow this coat to dry for at least 8-10 hours ensuring good ventilation.

Apply the 2nd coat as you did the first - this coat will flow much easier than the first. Again allow 8-10 hours for drying and ventilate well.

When the door is thoroughly dry, you may buff or polish by hand or with a machine.

Clean your brushes or rollers using white spirit or benzene-free brush cleaner.

Osmo Polyx Oil is incredibly easy to apply and hard wearing, meaning that you can apply this oil quickly, to achieve protection against everyday household spills. The oil is resistant to most liquids such as beer, tea, coffee, juice and even saliva! The oil is micro-porous and will absorb into all the tiny cracks in the wood and will even enhance the grain. This clear gloss finish gives your internal solid oak doors the shine the deserve! Whilst not for everyone, this glossy finish is guaranteed to catch your eye.

We recommend this oil to our customers as one of the best treatment for their internal solid oak doors, but it is also a great choice for many other timber items such as wooden flooring and furniture!

Each litre tin will cover approx. 8 square metres with two coats and depending on useage will look great for several years, after which it can simply be re-applied. All the ingredients are European Pharmascopoeia compliant, ensuring that they are benzene free and contain only de-aromatised white spirit. this means the product is safe and suitable for use on children's toys, so you don't need to worry about germs!

Application

Oswax is ready to use - you don't need to thin it, simply stir it well.

Apply the 1st coat thinly, thoroughly and evenly along the wood grain, removing any surplus immediately. Allow this coat to dry for at least 8-10 hours ensuring good ventilation.

Apply the 2nd coat as you did the first - this coat will flow much easier than the first. Again allow 8-10 hours for drying and ventilate well.

When the door is thoroughly dry, you may buff or polish by hand or with a machine.

Clean your brushes or rollers using white spirit or benzene-free brush cleaner.

This extra thin wood wax finish is recommended for oily or resinous internal hardwoods such as Mahogany, Teak and Walnut. This oil penetrates deep into the wood, giving a lasting finish and high levels of protection. Protects against liquid, dirt and wear, ensuring your household woodwork will last for many years to come. The clear satin finish offers a simple look, enhancing and highlighting the natural grain pattern of the timber. Apply 1 - 2 coats of oil. Approx. coverage: 24m²/L with one coat. Touch-dry in 12 hours.